DigiPak Draft 2

Front Cover

Inside Left

Inside Right

Back Cover & Spines

Above is our finalised DigiPak which we have developed from our research and feedback on draft one. We have made a lot of adjustments and improvements and created something very different but still linked for our original plans. Starting with the front cover we have changed almost every aspect although it may not seem it. We chose a different image from a new photoshoot, that felt less staged and more relaxed to fit the conventions of a DigiPak. We changed the backdrop to only include two different colours of ‘paint splatters’ as we felt that less was more and with the amount of colours we had originally used it didn’t look as good. We changed the location and font of the title to make it bolder and more modern due to the lighter block colour banner its on, which gives the front panel a cleaner finish.

Moving on too the inside left cover we totally swapped out the colour bloc circles for an image of our star that we took from the second photoshoot where we used a red film to light the shot. We took this image into photoshop and adjusted the saturation to make the colours stand out more. After doing this we moved onto the inside right panel and used a swatch from the inside left to change the background colour to create a stronger theme and more consistency.

Finally, the on the back cover we kept playing around and found that the tracks looked better one after another and centred on the back cover. We also replaced the background with another image from our second shoot. We removed the track numbers and change the font and colour of the text to fit the new background which, overall, we felt flowed better with the DigiPak in its entirety. We used stars to break up the tracks as we felt aesthetically the gaps between the tracks would look better and more finished with an accent like the stars we used. We also included the spines of the DigiPak, here we used the swatch tool on the back cover and choose a strong peach/orange colour to bring out the same colour in the back cover and also be able to contrast but coordinate with the front cover. Lastly, we adjusted the small print and barcode so they fit a conventional DigiPak better.

After deciding this was our final product we decided to get some more feedback from our peers to make sure it was conveying what we wanted to its audience. Below are some points we received on what worked and what we could potentially change on our product.

Peer Feedback Success:

  • Regular and appropriate colour scheme.
  • good shots which are conventional to an indie-pop Digipak
  • good selection of typeface
  • the colour palette looks like it fits in well with the indie-pop genre
  • the image of Noah on the inside left panel works well the the record on the inside right panel
  • I like the image on the back cover as it seems conventional of the genre
  • I really like the Digipak as a whole as I feel as though it flows and the colours work well together
  • the record on the inside right panel is very creative
  • I like the use of the stars to break up the track names on the back cover
  • I like the image of the fairy lights and the way it has been edited on the back cover

Peer Feedback Improvements:

  • We could’ve included a wider variety of shot types and more
  • Potential for more editing on the inside left cover.
  • Possibly change the colour on the inside circle on the inside right hand cover as it blends in a bit better
  • The album title doesn’t fit typical conventions of our genre, looks similar to a racing banner.
  • Unsure of the back cover colour scheme.

In conclusion we feel that our DigiPak is now finalised and at a stage that conveys what we want it too. Acknowledging our feedback we can see that  there was more successes than potential improvements and because of this we have decided that we can be happy with this as finished product.




DigiPak Draft 1

Here is the first draft of our DigiPak. We concluded from the research we did that we needed a colourful and simple design to follow the brand and genre of our created artist. On the front cover we have created a pastel ‘paint splatter’ style backdrop for our star to be centre of the cover. We have used mise-en-scene to put together what we feel was an appropriate dress choice to suit or album and genre. Moving onto the inside covers we have made the decision to fully replace the inside left with a photo instead of the digital art we have put in at the moment, although it currently matches the colour scheme we are using. We are very pleased with the outcome of the right inside cover and feel that the shape and design we have used, shows clear inspiration from our research and works creatively as it mimics the shape of the CD that would go over top of it. Finally, the back cover, we feel, needs a lot of development. We have been playing around with the track layout and have been playing with the idea of having an image of fairy lights on the back as this fits the brand we are trying to create. We are planning another shoot to mainly develop the back and inside left covers.

After listening to the feedback we have been given above, we have concluded some key points of success and improvement for our product. We plan to develop ideas from this draft and are planning another photoshoot to give more mature feel to the DigiPak as we feel that at the moment it could come across abit childish due to the shapes and colours used.

What Works:

  • the colours used on the inside left cover work well.
  • The mise-en-scene is conventional for the outfit on the front cover.
  • The colours used throughout are coordinated and uniform.
  • The font cover backdrop and font work together.
  • Appropriately designed to fit the genre, shows research.

What We Can Improve:

  • Match the inside right cover colours with some from the front cover to create flow in the DigiPak.
  • Utilise the circles on the inside left panel to highlight information or use a different image entirely.
  • Rearrange the track layout on the back cover, adjust the barcode, small print and tracks compliment the image we plan to use.
  • Use a more natural and casual pose for the front cover image.
  • Incorporate the blue into the other panels of our DigiPak.
  • Coordinate front and back fonts maybe use similar or the same one on both.

Overall, it is clear that there is plenty we want to play around with on our DigiPak as well as plenty of useful feedback that we can review and will help us develop our product.

Evaluation of Shoot

Click to Open


Looking back over our contact sheet I have included above I can assess our shoot for our DigiPak. We planned for two images specifically, one hero shot of our artist and a shot of fairy lights for the back cover. Looking at the images we came away from the shoot with it is clear that they are more toward a warmer colour scheme which is different to our current more pastel DigiPak. Molly and I have decided after experimenting with the images in the DigiPak that this wont be an issue as we prefer these colours and feel they look better aesthetically. We made the most of our shoot and played with different ideas during the shoot. For example using a coloured filter and using the fairy lights to reinforce atmosphere and mood. We are pleased with the outcome of our images and feel they will give us plenty of choice when coming to finalise which we will include in our DigiPak. The ones we don’t include we plan to use in our website.

Contact Sheet

Above is a contact sheet of our shoot for the front panel of our DigiPak, we decided to experiment with different films which we placed onto a projector and there for put a coloured light over our model, Noah. We really liked the effect of this but unfortunately it didn’t produce an image that we felt would work for what we had planned for our front panel. We planned to have an clear image of Noah that we could remove the background of and have a pastel or soft toned backdrop too, then we could develop that with effects such a brush strokes or polka dots.

We decided on our final image without any coloured films because these came out the best in terms of what we needed for editing. We decided on Noah’s outfit beforehand and decided that his floral shirt and dungarees provided enough bold colours without need to add more. We have decided on an image of Noah with his arms above his head to convey a sense of surrender or a relaxed atmosphere as though he would be surrendering all his thoughts into the album.

Photoshoot/Design Production Meeting and Risk Assessment

Planning our DigiPak front cover includes having a meeting to sit down and discuss are shoot time so that we were all free, who was going to be responsible for what and which studio we wanted to have it in. Below is a completed table of all of that information, this table is a clear plan for our shoot and means that we can utilise the time more effectively if we all know where we are supposed to be and when beforehand.

Further preparation after having our production meeting, was to consider the risks for our shoot. As we planned to have the shoot in school there were fewer risks than having it elsewhere. Despite this it is still necessary to consider what can go wrong so we can be aware and avoid that to have a successful shoot.

Now that we have thoroughly prepared we hope to have a simple and productive shoot, which will hopefully provide us with a clear image for our DigiPak front panel.

DigiPak Photo Mock Up






From our research we have put together a mock up draft of what we would aim for our final DigiPak to look like. We too images from our mood boards that were appropriate and added our own font which we we felt was appropriate in a contrasting, coordinating colour. Our front panel is a hero shot of our star with colourful spots behind and a brush stroke over the face to draw attention away from him and to the title above, because of this is also implies that his head is the album, like all his thoughts and feelings are represented by that one title. This idea could be enhanced with the use of arrows potentially.

Below are images of our mock up actually presented as a CD:

The Aim:

Our cover image we plan to have our model in the middle for a hero shot with the paint stroke across this face in a more indie or floral outfit. We plan to compliment this with the a pastel colour in the back. On the inside covers we really enjoyed the idea of having fruit or something that is a similar pattern to that to bring the outside colours in, it also conveys the idea of sensitivity as fruit is easily bruised, it also has connotations of skin, which link to the theme of relationships in our work. On the other inside cover we wanted to have it so when the CD would be removed it would reveal something and we like the feel of this indie rough pattern thats almost like smashed glass. Lastly on the back we continued a soft, pastel theme with the horizontal lights with the idea in mind that this would draw the eye to the song list.


DigiPak Moodboards







Molly and I have also made a collage using a range of textures, colours and patterns. We have chosen the dead rose as it symbolises the heartbreak the artist has been through, and the hoe fragile it is as it can die so quickly. The dots on the left hand side link back to the album of an original artist as their branding has these multicoloured polka dots to imply happiness and connect to the LGBTQ ideas. Following on from that the image of the ducks show a majority of brightly coloured ones, alongside one. This signifies feeling of being alone or outcast, this theme is key to our artist, as it supports which is one of the main messages our artist aims to put across to his audience.

After also putting together a a slide of specific images and other album covers we were inspired by and were of a similar genre to ours we noted that there is usually a strong use of graphic design or a hero shot to capture attention, use of warm or gentle colours such as pastels or reds are prominent as these are appropriate to the tone and mood of the genre, thus reflecting the music that artist produces.





To further our research we also put together a mood board on Pintrest with a variety of images that took our interest that we would be able to apply to our DigiPak mock up. We feel that our moodboard conveys a sense of emotion and open-mindedness, we also aim for it to have an inclusive and meaningful side. These themes and ideas would be conventional of an indie/alternative pop album. We hope to shoot images similar to a few which are displayed, and use Photoshop to help create some of the features we wish to include on our Digipak.

Digipak- Previous Students Work

I have chosen a DigiPak that a previous student has made in order too be able to analyse it and learn what works and what I would change before completing my own. The above DigiPak was for the music video ‘Lavender’. I will assess this work using the criteria below, this will help me develop my own understanding of the criteria I should aim to meet for the DigiPak I am going to create.

click to open

Though all of the images have been photoshopped, they have used a range of shot types. This variety means that the album is more interesting and detailed to appeal to the targeted audience. Interestingly the use of photoshop throughout the Digipak has been used too alter the colours and shape consistently for all of the different sides. They have taken raw images of light and hands and altered them to create a colour theme and glowing affect, as if everything is being lit with neon lights. I think that this is effective as it has an appropriate abstract, city life type feel, which contrasts a lot of other album covers that I have looked at. They have used a consistent colour scheme to fit the aesthetic, the neon, bold blue and pinks imply a nighttime sense. It is alike to city lights, this implies their genre and style, bold pop colours paired with the neon glow gives a sort of pop or dance feel.

This DigiPak is very heavily edited, and this is clearly appropriate to the genre they are aiming to convey. This would fit into a level 4.  Despite this the mise-en-scene is only somewhat visible with such heavy editing especially in the image of the band on the front cover, it is clear that they have made some choices to what costume or props would be relevant but this could’ve been more evident so would fall into a level 3.  The well structured and appropriate use of figurative language that relates to the genre, words like “Gameshow” are important as they convey a playful side to the music that links to the bold pop colour scheme. This title “Gameshow” is placed with care in mind of font, font size and appropriate location for that of the title. This level of care to the layout is important to make the album look professional and clear to the audience.

Overall I feel that this is a well constructed DigiPak with consideration to appropriate, relevant editing and structure that is relevant to the genre. Considering this and referring back to the mark scheme I feel that this would be awarded an upper level three.



Digipak Conventions Analysis

I chose to analyse the album cover for “blue neighbourhood” by Troye Sivan as this artist holds very similar values to that of the one who originally sang the song we chose for our music video. Troye Sivan is also apart of the LGBTQ community and his songs hold a theme of love and loss too whilst also falling into the “pop” genre. I have embedded above a couple of slides where I have analysed the album, by doing this I am able to understand further what other existing artists brands are like and therefore how I should base mine, it helps me to understand and how their star image is portrayed and how ours could be portrayed in a similar way. From looking at other artists work I can take inspiration for our own colour schemes, and overall tone and atmosphere for our DigiPak. With these ideas we can make clear and bold choices in our own work to produce a clear aesthetic for our created artist and their genre. Having clear ideas will help us in producing a professional looking product that clearly shows a response to our research.